X5000 POLISHING WHEEL OF PRODUCT INTRODUCE:

 X5000 polishing wheel is produced by high elasticity and high strength rubber material and high quality cerium oxide are mixed and generated after the reaction.The X5000 selected finer diamond particle size than the X3000, With higher precision, better polishing effect and it`s working speed can up to 2840 r / min, X 5000 can replace the CE-3 polishing wheel in the market now. We can offer two colors of the X5000 polishing wheel.

X5000 POLISHING WHEEL OF ADVANTAGE:

 With excellent elasticity and polishing effect ,  can achieve a glazing and transparent , no scraches` glass surface.

X5000 POLISHING WHEEL OF PICTURES AND DRAWING:

X5000 POLISHING WHEEL OF GENERAL PARAMETER:

SPECIAL PARAMETERS CAN BE CUSTOMIZED ACCORDING TO CUSTOMER NEEDS.

X5000 POLISHING WHEEL OF APPLICATION:

X5000 Polishing wheel is commonly used for polishing the glass which after grinding. Such as, construction glass, furniture glass, electronics glass, appliances glass, and bothroom glass,etc. Such as architectural glass doors and windows, glass table, glass rods, indoor screen glass,glass office partition wall, etc.

X5000 POLISHING WHEEL FOR APPLICABLE MACHINE:

straight edging machine,glass double edging machine.

X5000 commonly installs on the end of motor`s position for double edging machine and straight edging machine. It  is  final process of glass bottom edge`s fine polishing.

Suitable for all the edging machine brand on the market,such as Deway，ZXM，BOTTERO、BAVELLONI、bovone，Schiatti angelo, etc.

THESE WHEELS CAN BE WORKED WITH TOGETHER:

Internal diamond grinding wheel, Continuous diamond grinding wheel,resin diamond grinding wheel,etc.

ATTENTION FOR USING POLISHING WHEEL:

1, Before using polishing wheel, you should better check the wheel is or not intact(Cracked, passivation).

2,According the process of “coarse polishing -medium polishing-fine polishing”, the wheel should be install in the correct position and suitable machine.

3,Water is very important in the using of diamond wheel to grinding, which not only can improve the working efficiency and prolongs the service life of polishing wheel.

5,To choose an appropriate speed is also important. Speed too fast, force too much, May cause damage to the grinding wheel, and even the operator injured.