CUP WHEEL FOR ANGLE MACHINE OF PRODUCT INTRODUCE:

Parallel wheel. Cup Wheel for Angle Machine is made of Premium metal powder and self-produced synthetic diamond grits, sintered in high temperature and high pressure. This product have two kinds of diameter: 80mm and 100mm, the diamond grits is 80-100#, commonly work with glass angle machine and widely used for glass coarse grinding.

CUP WHEEL FOR ANGLE MACHINE OF ADVANTAGE

high speed, very sharp, no chipping,and it can be used until the diamond working layer is finished.

CUP WHEEL FOR ANGLE MACHINE OF PICTURE:

CUP WHEEL FOR ANGLE MACHINE OF APPLICATION:
Widely used for cutting and grinding ordinary flat glass, frosted glass, sandblasted glass, embossed glass, clip glass, insulating glass, laminated glass, glass brick, etc.

CUP WHEEL FOR ANGLE MACHINE FOR APPLICABLE MACHINE:

Electric angle grinder

APPLICABLE MACHINES

ATTENTION FOR USING DIAMOND WHEEL:

1, Before using diamond wheel, you should better check the wheel is or not intact(Cracked, passivation).

2,According the process of “coarse grinding-medium grinding-fine grinding-fine polishing”, the wheel should be install in the correct position and suitable machine.

3,The wheel should install the correct position, and should be passed static balance test before using.

4,Water is very important in the using of diamond wheel to grinding, which not only can improve the working efficiency and prolongs the service life of diamond wheel.

5,To choose an appropriate speed is also important. Speed too fast, force too much, May cause damage to the grinding wheel, and even the operator injured.

6,In the grinding process if the grinding wheel is not sharp enough or blocked,the grinding wheel should be trimmed slightly.

7,diamond wheel is a valuable tools,don`t leave in disorder, especially can not be affected with damp, erosion, impact,and also should not be exposed to high temperature.